Member

KD4APP's Corner Reflector testing...

In the foreground is my 3733 Corner Reflector unit. This unit has had the crystal replaced to move the output to 144/145MHz and has had the stub cut and the Murata filter modification.

Interesting, this Corner Reflector unit works better with the small reflector removed from the dipole - perhaps a 2-3db improvement - but as is, the signal is still nowhere near as good as the signal from the three foot system with all the modifications.

I currently use a 3733 with a N-connector in place of the dipole, connected to a helix antenna mounted on my  90cm dish.

Last Updated: March 20, 2002