CHNL Parameter Measurement Range Calibration Equation
---- ----------------- ----------------- --------------------
1A Total Solar Array Current 0 to 3000 ma I = 29.5 N (ma)
1B +X Solar Panel Current 0 to 2000 ma I = 1970 - 20N (ma)
1C -X Solar Panel Current 0 to 2000 ma I = 1970 - 20N (ma)
1D +Y Solar Panel Current 0 to 2000 ma I = 1970 - 20N (ma)
2A -Y Solar Panel Current 0 to 2000 ma I = 1970 - 20N (ma)
2B RF Power Out 70cm/2m 0 to 8 watts P = 8(1 - 0.01N)^2 (watts)
2C 24 Hour Clock Time 0 to 1440 min. t = 15.16N (min)
2D Battery Charge/Discharge -2000 to 2000 ma I = 40(N - 50) (ma)
3A Battery Voltage 6.4 to 16.4 V V = 0.1N + 6.4 (volts)
3B Half-Battery Voltage 0 to 10 V V = 0.10N (volts)
3C Bat. Chg. Reg. #1 0 to 15 V V =0.15N (volts)
3D Battery Temperature -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
4A Baseplate Temperature -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
4B PA Temp. 2m/10m -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
4C +X Facet Temp. -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
4D +Z Facet Temp. -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
5A PA Temp. 70cm/2m -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
5B PA Emit. Current 2m/10m 0 to 1167 ma I = 11.67N (ma)
5C Module Temp. 70cm/2m -30 to +50 deg. C T = 95.8 - 1.48N (deg. C)
5D Instrument Sw. Regulator
Input Current 0 to 93 ma I = 11 + 0.82N (ma)
6A RF Power Out 2m/10m 0 to 10,000 mw P = (N^2)/1.56 (mw)
6B RF Power Out 70 cm 0 to 1,000 mw P = 0.1(N^2) + 35 (mw)
6C RF Power Out 13 cm 0 to 100 mw P = 0.041(N^2) (mw)
6D Midrange Telemetry Calib. 0.500 V V = 0.01N (0.50 +/- 0.01) (V)